After the slurry flows into the tank through the PTMS Electromagnetic Separator feed tank, the ore particles of the magnetic separation equipment enter the tank feed area in a loose state under the action of the water flow of the feed pipe. In the action of the magnetic field, the magnetic agglomeration of the magnetic particles forms a "magnetic group" or "magnetic chain", "magnetic group" or "magnetic chain" in the pulp by the magnetic force, the magnetic pole movement, and is adsorbed on the cylinder.
Since the polarity of the magnetic poles is alternately arranged along the direction of the cylinder rotation, and is fixed when working, the "magnetic group" or "magnetic chain" when rotating with the cylinder, due to the alternating magnetic poles, magnetic agitation phenomenon occurs, and non-magnetic minerals such as gangue that are included in the "magnetic group" or "magnetic chain" fall off during the flip. The concentrate is the "magnetic mass" or "magnetic flux" that is eventually attracted to the surface of the PTMS Electromagnetic Separator cylinder.
The concentrate is transferred by the PTMS Electromagnetic Separator cylinder to the edge of the magnetic system where the magnetic force is weakest. It is discharged into the concentrate tank by the flushing water from the discharge pipe. Non-magnetic or weakly magnetic minerals are left in the slurry with the slurry discharge tank, that is, tailings.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com
Copyright © Foshan Powtech Technology Company Limited. All Rights Reserved.
Adjust the PTMS MAGNETIC SEPARATOR optimization strategy according to the specific application requirements
