Belt is an important part of PTMS Electromagnetic Separator, and the suitability of its tension is directly related to the operation efficiency of the iron removal machine and the service life of the belt. Therefore, it is very necessary to check the tension of the iron removal machine belt regularly. This paper will introduce how to check the tensionia of the iron removal belt.
Before checking the PTMS Electromagnetic Separator belt tension, make the following preparations:
1. Make sure that the iron removal machine has stopped running to avoid accidents during the inspection.
2. Prepare necessary tools, such as spenches, screwdrivers, etc. to adjust when needed.
3. Remove the standard range of the iron machine belt tension to determine whether the belt tension is appropriate.
If the PTMS Electromagnetic Separator belt tension is found to be inappropriate, it should be adjusted. The specific steps are described as follows:
1. Find the position of the tensioning device according to the equipment instructions.
2. Use a wrench or screwdriver to adjust the tensioning device so that the belt tensioning reaches the standard range.
3. Restart the iron removal machine and observe the operation of the belt. If there is a problem, it should be readjust.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com
Potential of nanomaterials for PTMS MAGNETIC SEPARATOR iron removal for practical applications
