Foshan Powtech Technology Company Limited.
Home > News
Measurement of magnetic field strength of permanent magnet cylinder PTMS Electromagnetic Separator
Time: Apr 17,2024

water cooled electromagnetic Separator for Silica Sand

For the measurement of the magnetic field strength of the permanent magnet cylinder PTMS Electromagnetic Separator, three sections are selected along the cylinder axis: one of which is selected in the middle, and the other two sections are taken at 200mm from each end. In each section, to measure the magnetic field strength of several key points on the cylinder surface. Generally, there are 3 points at the edge and middle of each magnetic pole (2 points at the edge of the magnetic system),


PTMS MAGNETIC SEPARATOR

There is one point in the middle of the pole gap of the permanent magnet cylinder type PTMS Electromagnetic Separator. If the pole number is n, the number of measurement points is N= [3n-2 + (n-1)] =4n-3. For example, the 3-pole magnetic system has 9 points, the 4-pole magnetic system has 13 points, and so on. Each section has a certain distance from the cylinder surface. For example, 10mm, 20mm, 30mm, 40mm, 50mm away from the cylinder surface.


what is magnetic separation used for?

The average of the magnetic field intensity of each point measured on the cylinder surface of the permanent magnet cylinder type PTMS Electromagnetic Separator represents the magnetic field intensity of the cylinder surface, and similarly, the average of the magnetic field intensity of each point at a certain height from the cylinder surface represents the magnetic field intensity of the arc surface. Before measuring, support the cylinder (and magnetic system) to a height for appropriate measurement.

Contact: DELLA

Mob: +86-13929907491

sales@powtechina.com

FOSHAN POWTECH TECHNOLOGY COMPANY LIMITED.

No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com

QR code

Copyright © Foshan Powtech Technology Company Limited. All Rights Reserved.