PTMS MAGNETIC SEPARATOR According to the feeding mode, tank structure type classification of downstream magnetic separator, reverse current magnetic separator and half reverse current magnetic separator. The countercurrent magnetic concentrator is the opposite feed direction of the slurry to the rotation Angle of the drum. The pulp is directly sent under the drum, and the non-magnetic and weak magnetic ore particles are discharged from the tailings hole on the bottom plate below the left, and the magnetic ore particles are adsorbed to the reverse feed direction of the cylinder and are taken to the discharge end and discharged to the concentrate tank.
Smooth PTMS MAGNETIC SEPARATOR ore direction and cylinder (magnetic) rotation to the same, into the pulp directly into the drum (magnetic) directly below, the magnetic, weak magnetic particles by the clearance between the two plates under the drum, magnetic particles is adsorbed to the downstream magnetic separator roller surface, then with the drum rotation to the unloading mining area is enriched to the concentrate tank.
The semi-upstream PTMS MAGNETIC SEPARATOR is between the forward and the countercurrent, which can be said to set the advantages of the two. In obtaining the high grade concentrate, it can also get a relatively high recovery rate. The semi-reverse current magnetic separator can run in series and parallel, using the multiple sweep and selection process scheme.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com
Potential of nanomaterials for PTMS MAGNETIC SEPARATOR iron removal for practical applications
