Maintenance and safety aspects of PTMS MAGNETIC SEPARATOR notes: the media plate is not required to string not blocked, keep 20 to 30 days to clean once, replace the media plate regularly (such as a year or half a year depending on the abrasion of the tooth plate), and pay attention to the gland screw to tighten. Pay attention to the temperature rise of lubricating oil and cooling oil during operation, and report to the workshop director when it is too high, so as to take necessary measures, such as shutdown maintenance.
When the temperature rise of the reducer exceeds the limit, it shall be reported to the workshop management immediately, and PTMS MAGNETIC SEPARATOR shall stop for inspection and treatment. Change the lubricating oil regularly. Pay attention to observe whether the pointer of each oil pressure meter, water pressure meter, voltmeter and ammeter is flexible and whether the reading meets the requirements, and find the relevant personnel to deal with the problem in time.
Pay attention to the working conditions of the front and back equipment associated with PTMS MAGNETIC SEPARATOR, especially the front weak magnetic, slag removal and other operations must work normally, in order to create good working conditions for strong magnetic operations. In order to gain market recognition and user approval, we have increased the properties of high magnetic inductance in the magnetic separator used for iron powder selection.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com
Copyright © Foshan Powtech Technology Company Limited. All Rights Reserved.
Adjust the PTMS MAGNETIC SEPARATOR optimization strategy according to the specific application requirements
