PTMS MAGNETIC SEPARATOR Turning the turning arm can adjust the bias Angle of the magnetic system. This adjustment process is like fine-tuning a precise instrument, which can be fixed with a pull rod after proper adjustment. The concentrate turns with the cylinder to the weakest magnetic force at the edge of the magnetic system, and is discharged into the concentrate tank under the action of the washing water flowing from the discharge pipe. If it is a full magnetic magnetic roller, the unloading is carried out with a brush roller.
PTMS MAGNETIC SEPARATOR The working area of the tank is made of stainless steel plate, because the working area needs to have good corrosion resistance, and the frame and other parts of the tank are welded with ordinary steel, which not only ensures the overall structural strength, but also reasonable control in the cost. Non-magnetic or weak magnetic minerals are left in the slurry with the slurry discharge tank, that is, tailings.
The whole PTMS MAGNETIC SEPARATOR process is like a carefully planned screening competition, where magnetic minerals are selected as concentrate by their own magnetic advantages, while non-magnetic minerals are eliminated as tailings. In the vast field of mineral sorting, there are a variety of sorting technologies, each of which has a unique principle and application scope, which together constitute the technical system of mineral sorting.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com
Which key technology reduces PTMS MAGNETIC SEPARATOR energy consumption
