The PTMS MAGNETIC SEPARATOR process and working principle of the actual ore are roughly as follows: the ore is crushed, fine crushed to a certain appropriate separation particle size by ball milling, mixed in the slurry pool and transported to the water separator by slurry pump, and the slurry enters the tank of the water separator for sorting. Magnetic substances are fully magnetized in the tank,
The non-magnetic substances are washed away into the tailings pond by the water, and the magnetized magnetic substances are taken to the concentrate area by the rotation of the tank body, and the magnetic substances are unloaded by high-pressure water or a brush, and then enter the concentrate pool. The entire PTMS MAGNETIC SEPARATOR process is carried out repeatedly to achieve mineral purification and grade improvement.
PTMS MAGNETIC SEPARATOR can select 400mm to 500mm ore, it should be said that the bulk dry separator on the size of the material line is not very obvious. Mainly depends on the nature of the ore, how much granularity is suitable for selection. It is generally broken to about 100mm. Wet magnetic separation, the general particle size -20mm. High gradient machine, generally choose -3mm.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com
Potential of nanomaterials for PTMS MAGNETIC SEPARATOR iron removal for practical applications
