The mineral iron removal process requires that the internal structure of PTMS Electromagnetic Separator tank should be reasonable, for example, the inner wall should be smooth to reduce the resistance of the pulp in the flow process; at the same time, the outlet of the tank should be moderate, neither to cause the pulp flow rate too fast, nor to affect the normal supply of the pulp. The ore particles enter the trough area loose under the action of the water flow of the water spray pipe.
The role of the water spray pipe is not to be underestimated. The water emitted by it can disperse the mineral particles and avoid the adhesion or agglomeration between the minerals. This is because if the particles clumps into the groove, it will affect the effective magnetization and separation of magnetic particles by PTMS Electromagnetic Separator. The pressure and flow of the flow need to be precisely adjusted according to the properties of the slurry and the size of the particles.
If the water pressure is too large, the particles may be scattered too much, causing some magnetic particles to form an effective "magnetic mass" or "magnetic chain" in time; if the flow pressure is too small, the purpose of loose the particles cannot be achieved. PTMS Electromagnetic Separator Remove the iron inside (FE2O3).
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com
Copyright © Foshan Powtech Technology Company Limited. All Rights Reserved.
Adjust the PTMS MAGNETIC SEPARATOR optimization strategy according to the specific application requirements
